Bells/Noise Makers

•Classic Straight design •Clamp fits most handlebars •10" length

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

The Incredibell Headset Mount 270 keeps valuable handlebar space free for other gear. The bell can be mounted any way you choose on the headset and the bell dinger can be rotated to any position around the bell. Plus, it's little, light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.

Dimension Bugle Horns are perfect for those who want to add a touch of humor to their bike. - 7.5 inches in length

Dimension Bulb Horns offer classic style and personality. - 9 inches in Length

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Accessorize your bike in a way that announces your presence in style. The omni-directional rotating top produces a clean, clear, loud ring. - Fits handlebars with 22.2mm - 31.8mm (.87-inch - 1.25-inch) outside diameters - Dome Diameter: 44mm (1.6")

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!

•Parrot Pirate •Fits most handlebars •Easy installation

- Great novelty horn - Fits most handlebars

Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

Origin-8's Time Clock Bell provides a wonderful sound and adds a touch of class to your handlebars. This great 55mm bell delivers the wonderful resonate sound of brass with all-metal mechanical parts.

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

Mirrcyle's Incredibell Telebell is the typical loud Asian bell with a rich, deep melodic ding-dong sound. The printing process used on the bell dome is unique. After the bell dome is formed, the surface is treated and hand brushed. A base color is applied. The graphic is then applied by hand and protected with a special lacquer coating. It’s a beauty. - Dome Diameter: 79mm (3.1") - Fits handlebars with 22mm – 25.4mm (.87" – 1") outside diameters. - Weight: 255g (9oz) - Dimensions: 79mm x 79mm x 112mm (3.1"; x 3.1" x 4.4")

The Incredibell Woodpecker is unique in the annals of bells. Even though it doesn't ring like a traditional bell does, it certainly will alert others of your approach. The pivoting ringer makes it easy to use in a variety of positions on the handlebars. The dual- size clamp fits handlebars with 21.7mm to 26mm diameters.

Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters

Let people know you're coming through. And do it in style. The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup'. We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Product details: - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware Specs: - Clamp: 22.2mm - Material: Brass

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)

Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.

- The bicycle bell has a diameter of 80 millimeters - Thanks to the loud "ding dong" sound, you can be heard clearly by other road users and pedestrians - The Basil Bloom Field Big Bell has an attractive sky blue finish

- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.

- Bell diameter: 60mm

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.

Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.