Car Racks

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Replacement Rear Wheelstrap for Forklift, Frontloader

Tensioning handle for FrontLoader universal bike mount. Includes one handle.

Pair of EndCaps for Yakima CoreBar.

Pair of EndCaps for Yakima JetStream bars.

Includes a single SKS key.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Safety and wheel straps for Joe Pro series strap racks. Includes one each.

Chainstraps for a multitude of rear of car bike racks.

Lock housing for Q Towers. Includes 1 lock housing and 1 retaining clip.

Rear wheel strap for Boa bike mount. Includes one strap.

Hardware for ShowBoat 66. Includes: - 2 end caps - 1 stop collar - 1 set screw - 1 hex wrench

Spare part for SideWinder

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Bolt hardware for ShowBoat 66. Includes 3 bolts, 3 nuts and 1 torx wrench.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Clip for 1A Raingutter tower. Includes one clip, one rivet and one cap nut. - Weight: 0.34 lbs.

These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.

Body for HitchLock. Requires SKS lock core. (Sold Separately) - Weight: 1.00 lb

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs

The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install