Parts & Accessories

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Replacement Rear Wheelstrap for Forklift, Frontloader

Tensioning handle for FrontLoader universal bike mount. Includes one handle.

Pair of EndCaps for Yakima CoreBar.

Pair of EndCaps for Yakima JetStream bars.

Includes a single SKS key.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Safety and wheel straps for Joe Pro series strap racks. Includes one each.

Chainstraps for a multitude of rear of car bike racks.

Lock housing for Q Towers. Includes 1 lock housing and 1 retaining clip.

Rear wheel strap for Boa bike mount. Includes one strap.

Hardware for ShowBoat 66. Includes: - 2 end caps - 1 stop collar - 1 set screw - 1 hex wrench

Spare part for SideWinder

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Bolt hardware for ShowBoat 66. Includes 3 bolts, 3 nuts and 1 torx wrench.

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Clip for 1A Raingutter tower. Includes one clip, one rivet and one cap nut. - Weight: 0.34 lbs.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.

Body for HitchLock. Requires SKS lock core. (Sold Separately) - Weight: 1.00 lb

- Beacon Light License plate relocation bracket - Includes bracket, M5 x 10mm (2), M5 x 16mm (2) Torx screws, mini Torx screwdriver

Thru-axle adapter for the Kuat TRIO rack.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs

The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"

Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty

Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).

Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install

Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty

Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

The Strap Cap is a crossbar end cap with an expanding nut inside that provides extra protection against tie-down straps sliding off the crossbar. Product Specs: - Weight: 0.25 lbs. - Limited Lifetime Warranty

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier

Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.

Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in

Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

- Beacon Light direct mount kit for Thule Easyfold car rack - Includes Thule direct-fit bracket, M5 x 25mm (2) and matching nuts (2), M5 x 10mm (2), Torx screwdriver

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in

A camping necessity, the SkyLoft holds the small, important stuff you always need, keeping them off the floor and right in reach. Clip it inside your SkyRise tent for easy access to headlamps, smartphones, and late night snacks. When you wake up, take it outside with you and slide it into the SideTrack on your SkyRise to stow jackets, towels, and toys. The mesh material allows you to see your stuff, and the generous 40" x 17" dimensions provide plenty of room. Two zippered pockets give you even more storage options, you can even use one of them to store the SkyLoft when it's time to break camp. Product Details: - Hanging storage net for the SkyRise tent helps keep your camping gear organized - Clips inside your SkyRise’s roof with adjustable straps so your late night essentials are easy to find and out of the way - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to stow daytime necessities, like cooking supplies and treats for Fido - See-through mesh material makes it easy to find what you’re looking for - Two zippered pockets add security and organization and, one doubles as a storage pouch for your SkyLoft when not in use - Measures a generous 40” x 17” to handle enough gear for two or three Product Specs: - Weight: 0.65 lbs - Dimensions: L 40.00" x W 17.00" x H 0.50"

Add the SmarT-Slot Kit 3 to the OffGrid cargo basket or DoubleHaul rooftop fly rod carrier for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. - T-slot hardware kit for OffGrid cargo basket and DoubleHaul fly rod carrier. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.33 lbs. - Dimensions: L 2.00 in x W 1.00 in x H 0.50 in - Limited Lifetime Warranty

A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately

The HD Bar SL Adaptor allows you to run the HD Bar on Yakima StreamLine towers so you can take advantage of our burliest crossbar ever. Give your vehicle a heavy-duty look and the strength to back it up. - Adapter required to use HD Bar with StreamLine Towers. Sold in a set of four. - Works with BaseLine, TimberLine, SkyLine and RidgeLine Towers only. - Weight: 0.42 lbs - Dimensions: L 1.75in x W 1.50in x H 1.00in - No Assembly Required

With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty

Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris. Product Details: - Durable rubber strip protects gear and crossbars from the wear-and-tear of loading - 76" length can be easily trimmed to fit any bar width - Compatible with Yakima HD Bar and JetStream Crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 76.00in x W 1.12in x H 0.33in - Fully assembled

Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.

A tough, dependable tie down, the SoftStrap delivers strength and protection. Durable webbing secures the load, a neoprene cover protects boats, coolers and vehicles, and an integrated hook and loop cover stashes excess strap so it’s not flapping in the breeze. Product Details - Long 8 to 16-foot tie down secures kayaks and larger gear - Neoprene cover protects boats, gear and vehicle - Integrated hook and loop cover makes it easy to stash excess strap - Sold as a pair - Combine with our Aero Crossbar Pads for an easy-to-use surf setup

Crossbar for LoadWarrior basket. Includes wrench.

Coupler for 1-7/8 " balls for RACKandROLL trailer.

Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty