Other

- Show support for your favorite brand with the Whisky Get Fancy patch. - Perfect to apply onto your hat, bag, or jersey

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The BlackTrack replaces the Skyliner (front wheel support) and enables you to steer freely in the Tacx Trainer software 4, Advanced. The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to choose where to ride when you are training in the virtual worlds. The BlackTrack communicates wirelessly with the computer via ANT+. Rubber Caps on the bottom prevent sliding and reduce noise. This steering frame is foldable. lightweight, and easy to store. The BlackTrack is suitable for the Tacx Trainer software (Windows PC) and can communicate with ANT+ trainers and interactive Smart trainers: - T1980 Bushido (ANT+) - T2020 i-Genius - T2050 Tacx IRONMAN trainer - T2060 Tacx IRONMAN Smart - T2080 Genius Smart with Upgrade Smart - T2170 i-Vortex - T2180 Vortex Smart with Upgrade Smart - T2240 Flow Smart with Upgrade Smart - T2780 Bushido Smart with Upgrade Smart

This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. The bottom of the mat has a non-slip coating and the top has additional reinforcement to prevent damage when you get on and off your bike. - Easy to fold up - Lightweight - Measures 173cm x 74cm

The NEO Skyliner provides support for the front wheel while using a trainer, and creates a more level platform for the bike.

The NEO Track replaces the front wheel support of the NEO and enables you to steer freely in the Tacx Trainer software 4, Advanced (Windows PC). The front wheel of the bike is placed on a turntable so that you can steer to the left and the right. This allows you to decide yourself where to go to when training in virtual worlds. The NEO Track is only suitable for the NEO Smart in combination with the Upgrade Smart (Tacx Trainer software 4, Advanced and ANT+ antenna required). - Communicates wirelessly with the computer via ANT+ - Rubber caps on the bottom prevent sliding and reduce noise - Foldable, lightweight and easy to store

With the disc extractor you can remove the aluminum disc on the side of your NEO Smart trainer in order to check the inside for residue and clean if necessary. This small tool is specially developed to open your NEO trainer yourself while staying within the terms of your warranty. The NEO disc extractor comes with three screws to fasten to your NEO. Use of this tool requires a 4mm Allen wrench, 5mm Allen wrench, and 24mm socket wrench.

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

The Tacx trainer mat protects your floor and muffles the noise of your indoor training sessions. - Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Give your Galaxia or Anteres the best possible protection for storage or transport by using this sturdy trainer bag. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage. This bag is ideal for riders who take their rollers to the track with them to warm up.

Replacement roller belt for Tacs roller trainers.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

Stickers/Decals for repairing or repainting your Big Dummy frame. - Includes frame and fork decals - Includes headbadge

Stickers/Decals for repairing or repainting your Surly Big Dummy. - Includes headbadge

Frame Stickers/Decals and a headbadge for repairing or repainting your Surly Cross Check.

The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit

The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”

Surly Disc Trucker frame decals. - Dry transfer style - Includes headbadge

Frame decal set with headbadge for repairing or repainting your Surly ECR.

Frame decal set for repairing or repainting your Surly ECR.

Show Surly pride and add some flare with these stickers. Slap one on your helmet, bike, or whatever you choose

Pop this replacement headbadge on your Surly and it's good as new.